Tweaker Install Method (2024)

To use the Tweaker, you will need to have the .NET Framework 4.6.2 or later installed. You can downloada copy from this link here.

You will only need to enable Developer Mode if you are planning to use the Microsoft Store version of PSO2. Otherwise, you can skip this step.

Enabling Developer Mode

You will need to enable Developer mode in Windows 10 - This is required to link the game to the Microsoft store in later steps.There's a guide on how to do it here.The Microsoft Store version of the game will not work without this!

Tweaker Install Method (1)

Setting up the PSO2 Tweaker

If you haven't done so already, grab the Tweaker installer from this page located here andinstall using the setup file.

Tweaker Install Method (2)

Remember where you install the Tweaker, you will need to know this for a later step!

Once installed, we will need to also set exceptions in our antivirus software. The reason for thisis that most antivirus software use heuristics to identify possible unknown viruses, using certainpatterns in behavior or how the program works. This means that the entire basis of how the Tweakerworks can get it mistaken for a virus. It's unlikely, but better safe than sorry!

The Tweaker also allows you to download fan translation patches (for the JP version), which the Tweaker adds into the game itself.It's these things that virus heuristics wrongfully assume that the Tweaker is a virus (every once in a blue moon).

Launching the Tweaker & Installing the game

Now, after setting exceptions in our antivirus software, open the Tweaker as administrator.You'll be greeted with a pop-up message similar to below, asking if you would like to open aguide on how to use the tweaker.

Tweaker Install Method (3)

Click on "No" and you'll see another message asking if you have installed PSO2 already.Click on the button labeled "No", then select the "Global" version. This will start the installprocess.

A warning dialog pop-up will open, informing you where to install the game. Click on "Ok" to continue.

Now select where to install the game. In this example, I chose a folder on my E:\ drive, but you can pick whereyou wish to have the game installed. If you would want to install to your C:\ drive, you can select the C:\ driveitself and the Tweaker will create a folder named PHANTASYSTARONLINE2_NA, with the full folder path beingC:\PHANTASYSTARONLINE2_NA\.

Tweaker Install Method (4)

You will then be asked to confirm your installation location. Click on "Cancel" to go back and reselect your desiredinstall location. Click on "Ok" to confirm this location.

Note: Please ensure that you have 70 GB free of storage space on the disk PSO2 is installing into.



Tweaker Install Method (5)

Another pop-up will appear, telling you that the Tweaker will now begin downloading and creating the necessaryfiles and folders it needs to install the game. Click on the "Ok" button to begin the download.

Now the main Tweaker window will appear. If the upgrading process does not automatically begin, click the "Check for updates" button.. During this time, the Tweaker may appear to be unresponsive for several minutes - this is normal, it's building a huge hashlist of 93,000 files. Give it a few minutes.

A pop-up may appear, informing you that it will restart the Tweaker and begin installing the game.If you get this message, click on "OK" on this pop-up.

Another pop-up may ask you if you would like to close another instance of the Tweaker. Do so to continuethe installation process.

Tweaker Install Method (6)Tweaker Install Method (7)

Now the VEDA Operating Terminal will launch and start the download process. Please sit back and do somethingelse as your PC will divert its resources to the Tweaker's download process. Do not try to interrupt this process.The speed of this installer/updater depends on your CPU speed, download speed, and how much SEGA's download serverallows you to download.

Tweaker Install Method (8)
Tweaker Install Method (9)
Tweaker Install Method (10)

By now, the Tweaker should be done downloading (or close to it, in that case, should be a few GB left).

Tweaker Install Method (11)

We're not done yet - If you leave here, your install WILL NOT WORK.
You must do the next part of this guide, or you game will not work.

This concludes this section of the guide. Click here to finalize the setup process.

Tweaker Install Method (2024)


How do I install PSO2 on steam? ›

Search for "Phantasy Star Online 2" or "PSO2" on the Steam store. Select "Phantasy Star Online 2" then select "Play Game". Choose the location you would like to install the game.

How to use PSO2 tweaker? ›

  1. Open the PSO2 Tweaker (6.0. ...
  2. Select where Steam installed PSO2. ...
  3. Wait for the console windows to finish, then hit OK to restart the Tweaker.
  4. Hit yes to do a filecheck, and wait for it to finish.
  5. Once the filecheck has completed, you can now launch the game by clicking "Start Game".

How to install original pso2? ›

In the Search Bar, type PSO2 and click on the game. This will take you to the games Steam page. From here, scroll down and select “Play Game”. You will then be prompted to install the game.

Is Phantasy Star Online 2 free on Steam? ›

Phantasy Star Online 2 New Genesis is a free-to-play action MMO. Join players around the world to explore the planet Halpha and fight in epic battles as ARKS Defenders! Unleash your imagination with our ultimate character creation experience and creative spaces to create your own phantasy.

How do I uninstall Tweaker? ›

Method 2: Uninstall Windows Tweaker via Apps and Features/Programs and Features. Look for Windows Tweaker in the list and click on it. The next step is to click on uninstall, so you can initiate the uninstallation.

What does Dex do in PSO2? ›

DEX is used as a requirement for equipping a variety of items, including many katanas, bullet bows, and gunslashes, and all sub units. Only DEX from class levels, passive skills, and an equipped mag count for these requirements.

How do you pose in PSO2 NGS? ›

Hand Pose tickets allow you to change the Hand Poses of Emotes available to you. * Changes cannot be made in PSO2 blocks as this function is only available in NGS. Select "Perform Emotes" from the Quick Menu, move the cursor over the Emote with a Hand Pose that you want to change , and press the button for "Hand Pose".

How do I install a game on Steam? ›

  1. Log in to Steam and click on. Library.
  2. Right-click on the game, select. Manage. ...
  3. Insert the first disc into your computer.
  4. Close Steam (Steam > Exit)
  5. Press Windows Key + R to open Run.
  6. In the Run window type the below line, but you will need to replace E: with the CD/DVD drive you are installing from. ...
  7. Press.

How can I put my game on Steam? ›

In order to get a game on Steam, you need to register as a partner at Steamworks. You'll need to fill out some forms, pay a submission fee, and go through an onboarding process. Then you will need to create your store page, build the depots for your game, upload a game build, and set a price for your game.

How do I point Steam to install a game? ›

Navigate to your Steam client 'Settings' menu. Select the 'Storage' tab. From here, you can view your default installation drive, as well as creating a new path by selecting the '+' button at the top. Once you have created the new path, all future installations can be installed there.

Top Articles
Latest Posts
Article information

Author: Eusebia Nader

Last Updated:

Views: 5770

Rating: 5 / 5 (80 voted)

Reviews: 87% of readers found this page helpful

Author information

Name: Eusebia Nader

Birthday: 1994-11-11

Address: Apt. 721 977 Ebert Meadows, Jereville, GA 73618-6603

Phone: +2316203969400

Job: International Farming Consultant

Hobby: Reading, Photography, Shooting, Singing, Magic, Kayaking, Mushroom hunting

Introduction: My name is Eusebia Nader, I am a encouraging, brainy, lively, nice, famous, healthy, clever person who loves writing and wants to share my knowledge and understanding with you.