Performance Accessories | Mohawk Build (2024)

FAQs

How to cut 4 in 1 molding kit? ›

Use a new 60–120 fine-tooth finishing saw blade for flooring for best cutting results. Use tin snips or a heavy duty cutting tool to cut the track and shims. Depending on moulding type, all parts may NOT be used. Always install screws in end holes of track and then every other hole.

Whatever the floors—laminate, wood or luxury vinyl—the Performance Accessories products by Mohawk are engineered to fit right the first time, eliminate steps and reduce the tools needed to finish the job. Want more Performance Accessories content?

If you're laying the LVP over an existing cushion-backed vinyl floor or a below-grade tile floor, you won't need to use an underlayment. However, you'll want to use one in every other application, including covering existing hardwood floors, uncushioned vinyl flooring, and concrete floors.

Stair Treads, Landing Tiles, Risers and Nosings offer a complete stair solution for commercial applications. Available in multiple formats and colorways that are tailored to fit your project's needs.

A power miter or compound miter saw will allow for more angle adjustments, some for both the miter and the bevel. Use one that's equipped with a carbide saw blade that has 80 teeth or more. Make sure the saw is square and the table angle gage is accurate.

In Europe, the company also produces and sells insulation, panels and mezzanine flooring. The company employs 43,000 people in operations in Australia, Brazil, Canada, Europe, Malaysia, Mexico, New Zealand, Russia and the United States. A Fortune 500 company, Mohawk is the worlds largest flooring manufacturer.

The Home Depot's brand of Lifeproof vinyl flooring is manufactured in partnership with HMTX Industries.

China is the most important producer of vinyl flooring, and there are many enterprises engaged in vinyl flooring production. More than 95% of the SPC and WPC are made in China. More than 40% of Vinyl sheet is made in China.

When moisture penetrates your flooring, it can cause mold, mildew, and the potential for water damage. A moisture barrier helps control the water vapor's movement to help protect your floors. Therefore, if you're installing floors in an area that sees moisture, even a little, a vapor barrier is needed.

If installing your luxury vinyl plank flooring over an existing vinyl floor or tile then you won't need an underlayment. This is because other vinyl may be backed by a cushion and tile can build the necessary level to prevent needing another layer.

Do I need a vapor barrier under LVP? ›

95% of the time, they will recommend a 6-mil vapor barrier to be installed underneath the flooring.

In 2005, Quick-Step was a company acquired as a division within Mohawk Industries, a flooring industry giant who sells just about every kind of flooring known to man through numerous subsidiaries. After becoming part of Mohawk, Quick-Step moved much of their production to the United States.

One common misconception about stair treads is that they are tacky or outdated. However, with the wide range of options available today, from sleek and minimalistic designs to bold and vibrant patterns, there is a stair tread to complement any interior style, or stair design.

With select styles mirroring that of hardwood flooring, Mohawk's laminate offers homeowners a budget-friendly alternative to other more expensive options. Durable and fade-resistant, Mohawk's laminate flooring will look great in your home.

A 4-in-1 transition strip has a mounting channel with a T-molding that fits inside the channel. A 4-in-1 transition strip can work with different types of flooring but they do need to be the same height. A 4-in-1 transition strip is used for carpet transition, hard surface reducers, and end molding.

A power miter saw is the best way to cut crown moulding once you measure the angles. The saw can be adjusted to cut at any angle – set it to 45 degrees for one side of a standard 90-degree corner. The saw can be set to 45 degrees to the left or 45 degrees to the right.

Cut PVC trim boards with the same hand and power tools that you use for wood. But use only carbide-tipped saw blades; plain steel ones will dull quickly. In general, the more teeth a blade has, the smoother the cut edges will be.